Source Photo by Oleg Volk

UltiMAK AK-47 Optics Mount (style 1) without side gas ports (Model# M1-B) For AK type rifles that have original gas tubes without side gas port holes. More information	$98.00
UltiMAK AK-47 Optics Mount (style 2) with side gas ports (Model# M2-B) For AK type rifles that have original piston tubes with side vent holes, including all Chinese AKs, Century C39, C39V2, RAS-47, and any other AK with holes in the tube. More information	$98.00
UltiMAK Barrel Shim Set Needed for installation of M1-B on Romanian 5.56 mm or 5.45 mm caliber AKs, as they have smaller diameter barrels. 5.45 and 5.56 mm Russian, Bulgarian, Chinese, et al, AKs do NOT need shims. (Model #SH-1) More information	$12.00
UltiMAK VEPR II / VEPR K Optic Mount (Model# M3-B) Includes mounting hardware and instructions. Handguard modification required, or Use ACR2-SS or ACR2-SL. Fits .223, 7.62 x 39, 5.45 x 39 and .308 Vepr II and Vepr K rifles. Does NOT fit "Version Two" Vepr with "integrated sights". More information	$112.00
Short AK Optic Mount for Hungarian AMD Designed to fit Hungarian AKs having short gas tubes. Also fits most Romanian Draco pistols and SBRs. (Not for "Krinkovs") (Model# M7-B) More information Out of Stock. ETA: TBA ,	$98.00
Forward Optic Mount for Yugo M70 Series AKs Replaces gas tube. Clamps directly to barrel for maximum stability and accuracy. Clamps to barrel for maximum stability and accuracy. For All Yugoslavian M70 model series AKs. (Model# M9) More information ,	$104.00
Forward Optic Mount for Saiga 12 & 20 Shotguns Fits adjustable sight rib models only. Picatinny (1913) style rail. Replaces sight rib - bolts front and rear. Comes with screws, hardware and instructions. Requires tools (punches and screwdriver) and Loctite. No permanent alterations to your shotgun. (Model# M11-S) More information ,	$100.00
Forward Optic Mount for Saiga 12 & 20 Shotguns For fixed-sight Saigas only. Picatinny (1913) style rail. Replaces iron sights - bolts front and rear. Comes with screws, hardware and instructions. Requires tools (punches and screwdriver) and Loctite. May require drilling and tapping in some cases. (Model# M11-L) More information ,	$100.00
Forward Optic Mount for Arsenal 106 & 107 "Krink" style AKs May fit some other super short "Krinkov" AK gas systems. (Model# M13) More information ,	$115.00
Forward Optic Mount for Yugo/Serbian M92 (PAP) AK Pistol For Zastava pistols (NOT for other AK pistols. For Romanian Draco, see M7-B) (Model# M15) More information ,	$104.00
Forward Optic Mount for C39, C39V2 & RAS-47 AK Pistols (NOT for other AK pistols) (Model# M17) More information ,	$104.00
AK Modular Rail Forend System Three generous length rails at 3, 6, and 9 O'clock. UltiMAK "Standard" length extends to gas block. Leaves room for bayonet. Length from receiver; 9 & 5/8" (24.4 cm) 23 cross slots per side. For stamped receivers. (Model# ACR2-SS) More information ,	$220.00
AK Modular Rail Forend System Three generous length rails at 3, 6, and 9 O'clock. UltiMAK "Standard" length extends to gas block. Length from receiver; 9 & 5/8" (24.4 cm) Leaves room for bayonet. 23 cross slots per side. For all milled receivers (Model# ACR2-MS) More information ,	$220.00
AK Modular Rail Forend System Three generous length rails at 3, 6, and 9 O'clock. UltiMAK "Long" length extends to front of gas block. Covers bayonet lug. For stamped receivers. (Model# ACR2-SL) More information ,	$220.00
AK Modular Rail Forend System Three generous length rails at 3, 6, and 9 O'clock. UltiMAK "Long" length extends to front of gas block. Covers bayonet lug. For all milled receivers. (Model# ACR2-ML) More information ,	$220.00
AK Modular Rail Forend System - Compact Model Three Picatinny rails; at 3, 6, and 9 O'clock. UltiMAK "Compact" length. Extends 8 & 5/8" (21.9 cm) from receiver. 21 cross slots per side. For Stamped receivers including AMD-65 and "Tabuk". (Model# ACR2-SC) More information ,	$220.00
AK Modular Rail Forend System - Compact Model Three Picatinny rails; at 3, 6, and 9 O'clock. UltiMAK "Compact" length. Extends 8 & 5/8" (21.9 cm) from receiver. 21 cross slots per side. For Milled receivers and Yugo M70 (Zastava). (Model# ACR2-MC) More information ,	$220.00
Front Sight Tool for AK and SKS Rifles Easy front sight windage and elevation adjustment. Super rugged, all steel construction. Built to last. Mfg; Tapco (Model# AKST) Out of Stock. ETA: TBA More information ,	$16.49
First Class Optics, Rings and Related Hardware Click here for Optic Sights Product Line ,

Stocks and Grips Attention owners of Yugo M70 series AKs: The Yugo upper and lower handguards, and the buttstocks, are entirely unique. We know of no aftermarket handguards or buttstocks that will fit, or that can be modified to fit, the M70 series rifles, other than the UltiMAK ACR2-MC and UltiMAK M9 mounts (above). However, the M70 AKs will accept standard AK pistol grips, including the ones offered below. Click on images for more information.

Tapco Six Position Collapsible Buttstock Heavy duty composite construction Designed specifically for AKs Fits Stamped receivers Color: Black (Model# 6PCAK) More information ,	$49.99
Tapco Six Position Collapsible Buttstock Designed specifically for AKs Fits Milled receivers Color: Black (Model# 6PCAKM) More information ,	$49.99
Tapco Folding Buttstock for AKs Heavy duty composite construction with steel hinge pin. Designed after the Galil folder. Fits Stamped receivers Color: Black (Model# AKFS) Out of Stock. ETA:TBA More information ,	$39.99
Synthetic AK-47 Stock Set Fits Stamped receivers Color: Black (Model# AKBSW) More information ,	$102.00
Buttstock Only, Synthetic, for AKs Fits Stamped receivers Color: Black (Model# AKBSWB) More information ,	$44.99
Synthetic AK-47 Stock Set Fits Stamped receivers Buttstock is 1.25" longer than original Color: Black (Model# AKBSL) More information ,	$102.00
Buttstock Only, Synthetic, for AKs Fits Stamped receivers Buttstock is 1.25" longer than original Color: Black (Model# AKBSLB) More information ,	$44.99
Synthetic AK-47 Stock Set - Green Fits Stamped receivers Color: O.D. Green (Model# AKGSW) Out of Stock. No ETA. More information ,	$106.00
Buttstock Only, Synthetic, for AKs - Green Fits Stamped receivers Color: O.D. Green (Model# AKGSWB) More information ,	$44.80
Synthetic AK-47 Stock Set Fits Stamped receivers Buttstock is 1.25" longer than original Color: O.D. (Green) (Model# AKGSL) Out of stock. No ETA. More information ,	$106.00
Buttstock Only, Synthetic, for AKs - Green Fits Stamped receivers Buttstock is 1.25" longer than original Color: O.D. Green (Model# AKGSLB) More information ,	$44.80
Synthetic AK-47 Stock Set Fits Milled receivers Buttstock is 0.75" longer than Warsaw original Color: Black (Model# AKBML) Doscontinued. More information ,
Buttstock Only, Synthetic, for Milled AKs Fits Milled receivers, single or double tang Buttstock is 0.75" longer than Warsaw original Color: Black (Model# AKBMLB) Discontinued. See AKBMWB More information ,
Buttstock Only, Synthetic, for Milled AKs Fits Milled receivers Original Warsaw Pact length Color: Black (Model# AKBMWB) Out of stock. ETA: TBA More information ,	$47.00
Choate Stock set for AK variants Color: Black for Stamped receivers (Model# CHOS-B) More information	$54.45
Choate Stock set for AK variants Color: Black Same as above, for Milled receivers (Model# CHOM-B)	$54.45
Choate synthetic forend Fits UltiMAK Mount without internal modification. Color: Black for Stamped receivers (Model# CFS-B) More information	$10.00
Choate synthetic forend Fits UltiMAK Mount without internal modification. Color: Black for Milled receivers (Model# CFM-B) More information	$10.00
Choate Synthetic Upper Handguard Matches CFS-B and CFM-B forends. Color: Black Fits milled and stamped receiver AKs (Model# CUH) More information	$10.00
Synthetic AK Forend (Lower Handguard) Fits Stamped receivers Color: Black w/matte finish Metal heat shield & reinforcements (Model# KVFS-B) More information ,	$41.93
Synthetic AK Forend (Lower Handguard) Fits Stamped receivers Color: Olive Drab w/matte finish Steel heat shield & Steel reinforcements (Model# KVFS-OD) More information Out of stock.ETA:TBA ,	$44.80
Synthetic AK Forend (Lower Handguard) Fits Milled receivers Color: Black w/matte finish Metal heat shield & reinforcements (Model# KVFM-B) More information ,	$41.93
AK Synthetic Upper Handguard. Fits nearly all AKs, milled and stamped. Matches finish on KVFS-B and KVFM-B. Color: Black w/matte finish (Model# KVUH) More information ,	$15.40
AK Synthetic Upper Handguard. Fits nearly all AKs, milled and stamped. Color: Olive Drab w/matte finish (Model# KVUH-OD) More information ,	$16.80
M249 Style Pistol Grip for AKs Larger than Comm bloc grips for better fit. Includes hinged storage compartment. Fits stamped and milled receiver AKs. Color: Black (Model# AK249) More information	$19.99
Ergo Contoured Grip for AKs Classic Ergonomic design for better feel and control. Includes a storage compartment with improved cover. Fits most AKs, stamped and milled - Some require minor fitting. Ambidextrous. Comes with grip bolt, washer, and lock-washer Color: Black (Model# E4139) Out of stock. ETA: TBA More information	$35.75
Standard AK Pistol Grip Fits Stamped and Milled AKs Comm Bloc standard shape. Improved design adds strength and better fit. Built-in metal washer. Color: Black Made in U.S.A. Embossed with "US". Model: KVPG More information	$14.99
Standard AK Pistol Grip Fits Stamped and Milled AKs Comm Bloc standard shape. Improved design adds strength and better fit. Built-in metal washer. Color: OD Green Made in U.S.A. Embossed with "US". Model: KVPG-OD More information	$15.99
AK Grip Nut For Stamped Receivers Comm Bloc standard design. Model: AKGN Out of Stock. ETA: TBA More information	$5.00
AK Grip Bolt 100 mm (4"), Small Head Comm Bloc standard design. Fits KVPG, KVPG-OD and many others. Model: AKGB More information	$4.75

Main Page | Products | Photo Gallery | Distributors/Links | User Resources