UltiMAK Optic mount for Ruger® Mini-14®
Fits early production up to circa 2007
Weaver/Picatinny standard spec rail

Clamps directly to barrel for maximum stability and accuracy. Enables use of Intermediate Eye Relief (IER) telescopes, reflex sights, and holographic weapon sights. Comes complete with 6 screws, clamp, Allen wrenches, and easy instructions. No gunsmithing or alterations required. Requires original factory standard barrel profile.
Fits 180 series through circa 2007 production.
Will NOT fit 2008 and later production rifles - see below*
CNC machined from 2024 aluminum billet.
Cerakote Graphite Black finish.
Made in U.S.A.

Model# M4-B

Mini-14 Scope Mount

Back to Mini-14 & Mini-30 Products

Product Index

Main Page

Installation View

Forward, low mounting configuration with the enhanced versatility of a standard mounting rail. Since the M4-B clamps directly to the barrel and does not interface with the stock in any way, it fits with any aftermarket Mini-14 stock we know-- wood or synthetic, fixed, collapsible, or folding.
Mini-14 Scope Mount
In this photo, you see that the barrel comes straight out from the gas block with no visible taper. The UltiMAK M4-B fits these .223 barrels nicely:

Ruger Mini-14 Mount

*The 2008 and later Mini-14s have a heavier barrel with a distinct taper just in front of the gas block. The UltiMAK M4-S is designed to fit these barrels. You can clearly see the taper in front of the gas block in this Photo. The M4-B will NOT fit these barrels, and in that case you want the M4-S;
Mini-14 Scout Mount

Taking the functional utility of the Mini-14 to the next level, the new UltiMAK M4-B Mini-14 scope mount is the lowest, most stable forward mount available. Perfect for mounting Aimpoint reflex sights, EOTech holographic sights, and Trijicon Reflex and Tripower tactical sights, the forward positioning allows faster targeting with better field of view, greater mounting versatility, and maintains full access to the receiver mechanism with optics in place. Also works extremely well with Intermediate Eye Relief scopes, like the Leupold "Scout" scope. The MIL STD 1913 (Weaver/Picatinny) rail sits lower than the original Ranch receiver mounts. This provides a better, more natural spot weld for rapid target acquisition. Allows co witnessing of iron sights with tube bodied, reflex sights. No-gunsmithing installation. Fits earlier production standard and Ranch rifles, plus the circa 2007 production MINI-14 and KMINI-14 series (see exception above)(may not be able to co witness with circa 2007 rifles due to the lower iron sight axis). Completely CNC machined from super strong 2024 aluminum billet, bead blasted and finished in Cerakote "Graphite Black". - UltiMAK - Make Every Shot Count

Ruger®, Mini-14® and Mini-30® are registered trademarks of Sturm, Ruger & Co.