Mounts sold under this category are discounted because they have minor blemishes (this kind of merchandise is also referred to as “seconds”). They have flaws that are cosmetic, but do not impact the mount’s functionality. Each blemished M8 mount has its own imperfections, which may include small scratches and slight discoloration of the finish. The appearance of blemished mounts can vary widely.
UltiMAK M1A / M-14 Forward Optic Mount
Fits original, standard weight barrel profile (H&R, Springfield, TRW, etc.).
- Ultra-low mounting allows co-witnessing and an improved cheek weld – no need for a comb riser.
- Clamps directly to barrel for maximum stability and accuracy.
- Replaces entire upper handguard.
- Generous length rail allows use of full length “Scout” scopes, pistol scopes, reflex sights, etc.
- Includes screws, barrel clamps, recoil lug, Allen wrenches, and easy instructions.
- Easy installation: no modifications required.
- Made in USA
Construction: One-piece aluminum body (6061-T6)
Finish: Hard anodized, matte black
Rail: Picatinny style (22 slots)
Length: 12.3125″ (12 & 5/16)
Fits standard weight barrels only.*
Model# M8-Seconds
Forward, low mounting configuration with a generous length Picatinny type rail. This shows the M8 on a Springfield standard model M1A, topped with the Leupold “Scout” scope– Elegance, grace, power, and innovation rooted in the experiences of history.
This is by far the lowest, most stable optic mount available for the M-14 / M1A, and since it replaces the entire handguard, it does not require a new or modified handguard. The 1913 style (Picatinny/Weaver) rail sits lower than the factory iron sights, providing a better, more natural cheek weld for rapid target acquisition and natural point of aim, without the need for a comb riser. Now for the first time ever, you can co-witness the factory M-14/M1A iron sights with tube bodied, reflex sights such as Aimpoint Micro or Trijicon MRO.
The entirely unobtrusive optic mount can remain in place whether or not you’re using optics. The forward positioning allows faster targeting with better field of view, very forgiving eye relief, greater mounting versatility, and full access to the receiver mechanism and stripper clip guide with optics in place. The rifle can be easily and completely field stripped without removing the mount or the optic.
No-gunsmithing installation – the M8 mount can be installed in the field by anyone who can read the instructions and use the supplied Allen wrenches. Fits standard weight M-14 and M1A barrels only. Works as a drop-in installation with any wood or synthetic stock. Completely CNC machined from super strong 6061-T6 aluminum, bead blasted and Mil Spec hard anodized for a matte black finish that will hold up to years of hard use. The barrel clamps and recoil lug are made of 4142 chrome/molly steel with a satin black phosphate finish. This is the mount that should have come with the M-14 from the beginning.
UltiMAK – Take your best shot
*Compatibility: The UltiMAK M8 mount fits only standard, GI spec barrels. In the current Springfield line-up, the compatible models are; M1A Standard, M1A Scout Squad, SOCOM 16, SOCOM II, and M1A Tanker. Springfield “Loaded Standard” and all of their “Match” and “Tactical” models have heavier-than-standard barrels, which will not allow M8 mount installation. Chinese M1A clones have standard barrels and fit nicely with the M8 mount. If your M-14 or M1A does not fit any of the above descriptions, you should call the manufacturer and ask if the barrel is of standard M-14 outer diameter specs, including the size and location of the op-rod guide. As a side note; the original U.S. military production “National Match” M-14s had standard weight barrels. Among the differences were that the chamber, bore and groove tolerances were halved.
(photo by Oleg Volk)