Aimpoint CompM3 Maximum Duty Red Dot Reflex Sight
New ACET system gives 50,000 hour battery life (see specs below)
Night vision compatible.
Now available with 2 M.O.A. or 4 M.O.A. dot reticle.
Comes with battery, flip up lens caps, protective rubber cover and owner's manual. The windage, elevation, and battery caps are tethered.
30 mm Ring sold separately
Optical Magnification; 1X
4 M.O.A. Red Dot Reticle
2 M.O.A. Red Dot Reticle
Out of Stock
Back to Optics, Rings, & Hardware
|Because of their constant innovation and dedication to the craft, Aimpoint is recognized as the worldwide leader in sight system technology. At right is the Aimpoint CompM3 with its protective cover installed, atop a .30 M1 Carbine equipped with an UltiMAK M6-B forward optic mount. The AP10819 30 mm ring and mount are sold separately. Also shown is the AP11430 extended battery cap (sold separately) which keeps a reserve power cell handy at all times. With each cell providing 50,000 hours of reticle illumination, that's a 100,000 hour supply (more than 11 years on setting 7 of 10).|
The CompM3 features Aimpoint's newest Advanced Circuit Efficiency Technology (ACET) giving the sight unparalleled battery life and ease of use. Built for use in daylight, low light, and at night (when used in conjunction with a night vision device) the CompM3 will hold up under the roughest physical handling and most severe weather conditions. Its 4 lowest reticle brightness settings are reserved for use with photo multiplier type Night Vision Devices (NVDs) Gen 1, 2, or 3, and are invisible to the unaided eye. The 6 higher settings are for use in transitional light and daylight, of which the maximum setting is the same extra bright setting found in the other Comp series sights. It is the perfect choice for professionals, hunters, and sport shooters who want the very best in optical precision, versatility, and ruggedness.
Aimpoint sights are designed to allow a shooter to do what comes naturally - keep both eyes open while focusing on a target. This method of sighting maintains the shooter's full field of view, greatly enhancing situational awareness while maximizing target acquisition speed. Thanks to the parallax-free design, the dot follows the movement of the user's eye while remaining fixed on the target, eliminating any need for centering. Further, the sight allows for unlimited eye-relief.
Specifications for CompM3
|Material - housing:||Extruded, high strength aluminum, anodized|
|Material - rubber cover:||Chloroprene rubber (corresponding to MIL-R-6855)|
Hard anodized, Dark Graphite Grey, matte
Rubber cover: Black or Dark Earth Brown.
|Material - lens covers:||Thermoplastic Elastomer, black, non-glare finish.|
|Eye relief:||Unlimited. No centering required.|
Anti Reflex coating, all surfaces.
Multi-layer coating for red dot reflection.
Band Pass Coating for NVD compatibility.
Model 11403: 4 M.O.A.
Model 11408: 2 M.O.A.
|Switch, dot brightness:||10 positions: 4 NVD, 6 daylight, of which 1 is Extra Bright.|
|Battery:||One 3 Volt Lithium battery type 2L76 or DL 1/3N|
|Battery life, typical*:||50,000 hours at setting 7 out of 10 (ACET Diode).|
|Length (incl. lens covers):||130 mm (5.1")|
62 mm (2.4") including rubber cover,
55 mm (2.2") without.
58 mm (2.3") including rubber cover,
55 mm (2.2") without.
270 grams (9.5 oz) including rubber cover
220 grams (7.8 oz) without.
|Adjustment:||+2 m at 100 meters, windage and elevation. 1 click = 1/2 M.O.A. (10 mm at 80 meters, 1 click = 13 mm at 100 meters, 1 click = 1/2" at 100 yards, 1" at 200 yards, etc.)|
|Mounting:||One wide ring, 30mm diam, Aimpoint QRP Ring, or A.R.M.S. #22 throw lever ring.|
|Max temperature range:||-45o C to +70o C (-50o F to 160o F)|
|Water resistance:||Submersible to 45 m (135 ft.) water depth**|
* New technology called ACET
**Tests performed have shown that sights will stand over 100 meters
MOA: Minute Of Angle, 1MOA = 30 mm at 100 m, 1MOA = 1" at 100 yards
NVD: Night Vision Device