Aimpoint CompM2 Military Spec Reflex Sight
Used by US Military and Special Forces
Night vision compatible
Comes with battery and flip up lens caps. The windage, elevation, and battery caps are tethered.
Ring sold separately

$517.00

Out of Stock

Aimpoint military reflex sight
Back to Optics, Rings, & Hardware

Product Index

Main Page
Aimpoint CompM2 installed on a Vepr II AK equipped with an UltiMAK "Scout" Mount (M3-B). This arrangement allows for co-witnessing of the iron sights when used with ring 10818 or 10819. The power module (with 10 position switch) is shown mounted on the left-hand side of the weapon. However, all Aimpoint Comp sights can be mounted with the power module on either side. Also shown is the UltiMAK ACR2-SL modular forend system. Aimpoint military red dot sight on AK

Aimpoint's Reflex Sights are rugged precision electronic optical red dot sights developed for civilian, military and law enforcement applications. Aimpoint sights are designed for the "two eyes open" method of sighting, which greatly enhances situational awareness and target acquisition speed. Thanks to the parallax-free design, the dot follows the movement of the user's eye while remaining fixed on the target, eliminating any need for centering. Further, the sight allows for unlimited eye-relief. The CompM2's 4 NVD settings are compatible with 1st, 2nd, and 3rd generation night vision devices. This model utilizes the CETechnology, a radical advancement in red dot sighting performance with over 30 times longer battery life than the earlier XD sights.



Specifications for CompM2

Material - housing: Extruded, high strength aluminum, anodized
Surface finish: Hard Anodized, Graphite Grey, Matte
Material - lens covers: Thermoplastic Elastomer, black, non-glare
Optical magnification: 1X
Eye relief: Unlimited, centering dot in lens is not required
Optical coating: Anti Reflex coating, all surfaces
Multi-layer coating for red dot reflection
Band Pass coating for NVD compatibility
Dot size: 4 MOA
Switch, dot brightness: 10 positions: 4 NVD, 6 daylight of which 1 is extra bright
Battery: One 3 Volt Lithium battery type 2L76 or DL1/3N
Battery life* (hours): 1000-10,000 h (typically 10 years at CompM2 NVD position)
Length (incl. lens covers): 130mm (5.1")
Width / height: 55mm (2.2")
Weight (incl. lens covers): 200 gram (7.1 oz)
Adjustment: Windage and elevation 1 click = 10 mm at 80 meters, 1 click = 13 mm at 100 meters, 1 click = 1/2" at 100 yards.
Mounting: One wide ring, 30mm diam, or Aimpoint QR Ring
Max temperature range: -45o C to +70o C (-50o F to 160o F)
Water resistance: Submersible to 25 m (80 ft.) water depth**

* Average values, depending on brightness setting

**Tests performed have shown that sights will stand over 100 meters

MOA: Minute Of Angle, 1MOA = 30 mm at 100 m, 1MOA = 1" at 100 yards

NVD: Night Vision Device