Aimpoint CompML3 Military Spec Red Dot Reflex Sight
New ACET system gives 50,000 hour battery life (see specifications below)
A heavy-duty sportsman's optic.
Used extensively by U.S. Military and Special Forces.
Available with 4 MOA or 2 MOA dot reticle.
Comes with battery, flip up lens caps, and protective rubber cover. The windage, elevation, and battery caps are tethered.
Ring sold separately


4 M.O.A. Dot Reticle
Model AP11405
$526.00


2 M.O.A. Dot Reticle
Model AP11416
$526.00
Aimpoint Reflex Sight, CompML3
Aimpoint CompML3 Red Dot Sight with Rubber Cover
Aimpoint CompML3 Sight on Ruger Mini-14
Back to Optics, Rings, & Hardware

Product Index

Main Page
Aimpoint CompML3 installed on a Ruger Mini 14 equipped with an UltiMAK "Scout" Mount (M4-B) which allows for co-witnessing with the iron sights when used with ring 10818 or 10819.

The CompML3 features Aimpoint's breakthrough Advanced Circuit Efficiency Technology (ACET) giving the sight unparalleled battery life and ease of use. Built primarily for use in daylight and low light conditions for law enforcement and military applications, the CompML3 will hold up under the roughest physical handling and most severe weather conditions. It is the perfect choice for professionals, hunters, and sport shooters who don't need night vision device compatibility but want an extremely tough and reliable sight. For night vision compatibility, go for the CompM2 or CompM3.
Aimpoint sights are designed for the "two eyes open" method of sighting, which greatly enhances situational awareness and target acquisition speed. Thanks to the parallax-free design, the dot follows the movement of the user's eye while remaining fixed on the target, eliminating any need for centering. Further, the sight allows for unlimited eye-relief.



Specifications for CompML3

Material - housing: Extruded, high strength aluminum, anodized
Surface finish: Hard anodized, black, non-glare finish sight body protected by a rubber cover, matte black.
Material - lens covers: Thermoplastic Elastomer, black, non-glare finish.
Optical magnificarion: 1X
Eye relief: Unlimited.
Centering red dot in lens is not required
Optical coating: Anti Reflex coating, all surfaces
Multi-layer coating for red dot reflection
Dot size: Model 11405: 4 MOA.
Model 11416: 2 M.O.A.
Switch, dot brightness: 10 positions: 1 off, 9 daylight of which 1 is Extra Bright
Battery: One 3 Volt Lithium battery type 2L76 or DL1/3N
Battery life, typical*: 50,000 hours at setting 7 out of 10.
Length (incl. lens covers): 130 mm (5.1")
Width / height: 55 mm (2.2")
Weight (incl. lens covers): 220 grams (7.8 oz)
Rubber cover: 50 grams (1.7 oz)
Adjustment: Windage and elevation 1 click = 1/2 M.O.A. (10 mm at 80 meters, 1 click = 13 mm at 100 meters, 1 click = 1/2" at 100 yards, 1" at 200 yards, etc.)
Mounting: One wide ring, 30mm diam, Aimpoint QRP Ring, or A.R.M.S. #22 throw lever ring.
Max temperature range: -45o C to +71o C (-50o F to 160o F)
Water resistance: Submersible to 45 m (135 ft.) water depth**

* New technology called ACET

**Tests performed have shown that sights will stand over 100 meters

MOA: Minute Of Angle, 1MOA = 30 mm at 100 m, 1MOA = 1" at 100 yards

NVD: Night Vision Device